Труды сотрудников ИВМ СО РАН

w10=
Найдено документов в текущей БД: 11

    Water resources of the Krasnoyarsk Krai in sustainable water management indices
[Text] / N. Shaparev, N. Astafiev // Int. J. Sustain. Dev. World Ecol. - 2008. - Vol. 15, Is. 6. - P574-583, DOI 10.3843/SusDev.15.6:9. - Cited References: 23. - The work was carried out with financial support from the RFBR-KRFS project (No. 07-05-96802) and a grant from the Russian Federation President for leading scientific schools (SS3428.2006.9). . - ISSN 1350-4509
РУБ Ecology

Кл.слова (ненормированные):
Sustainable water management -- sustainable development indices -- water resources -- Yenisei River basin

Аннотация: A system of sustainable water management is suggested. This includes natural water production; acceptable sanitary-epidemiological water state; conservation and maintenance of biological water diversity; development of socioeconomic functions of water management; and instruments for water policy to conserve sustainable management of water consumption and protect consumers from injurious water effects. The developed system was applied to analyse the situation in the Yenisei River basin (Russia). Analysis in the basin showed that it is currently unsustainable: the share of purified water has not increased; water cost per unit production is high; the quality of water in the Yenisei River is still characterised as 'polluted'; some people in the basin drink water containing injurious substances; and both purification facilities and water supply systems are in an unsatisfactory state. Hence, the financing of hydrological work is currently inadequate.


Доп.точки доступа:
Astafiev, N.; Шапарев, Николай Якимович

    Assessment of changes in the qualitative composition and properties of dissolved organic matter on hydrooptical characteristics when fractional filtration of natural water
[Text] / P. V. Postnikova ; ed.: G. G. Matvienko, O. A. Romanovskii // 21ST INTERNATIONAL SYMPOSIUM ON ATMOSPHERIC AND OCEAN OPTICS: : SPIE-INT SOC OPTICAL ENGINEERING, 2015. - Vol. 9680: 21st International Symposium On Atmospheric and Ocean Optics - (JUN 22-26, 2015, Tomsk, RUSSIA). - Ст. UNSP 96802Y. - (Proceedings of SPIE), DOI 10.1117/12.2204892. - Cited References:12 . -
РУБ Engineering, Ocean + Meteorology & Atmospheric Sciences + Optics

Аннотация: The paper discusses the changes hydro-optical parameters that characterize the qualitative composition of dissolved organic matter (DOM), during fractional filtering though large (4.5 mu m and 1.76 mu m) and small (0.9 mu m) filters. A loess reservoir lake Khanka containing great amount of suspended inorganic matter were selected as the research object. In order to assess changes in the composition of the DOM the following parameters were selected: index of the degree exponent of absorption spectrum, the specific absorption coefficient, relative specific fluorescence yield and relative specific fluorescence,. The research has shown that not only the content of organic matter during adsorption on the surface of the suspension is changing during filtration, but also the composition.

WOS,
Scopus

Держатели документа:
Russian Acad Sci, Inst Computat Modelling, Siberian Branch, Krasnoyarsk, Russia.

Доп.точки доступа:
Matvienko, G.G. \ed.\; Romanovskii, O.A. \ed.\; Постникова, Полина Владимировна

    «Виртуальный СЛИПП» - математическая модель для управления агрегатом СЛИПП и её визуализация с помощью программных продуктов WinCC 7.0 и Step 7
[Текст] : статья / Т. В. Пискажова [и др.] // Вестник Сибирского государственного аэрокосмического университета им. академика М.Ф. Решетнева. - 2015. - Т. 16, № 2. - С. 470-477 . - ISSN 1816-9724
   Перевод заглавия: “Virtual CC&RP” - a mathematical model for the control of the unIt CC&RP and its visualization with the help of software products WinCC 7.0 and Step 7
УДК

Аннотация: Процесс совмещенного литья и прокатки-прессования (СЛИПП) целесообразно использовать для производства длинномерных деформированных полуфабрикатов из алюминия и его сплавов, из которых изготавливают электрические провода, заклепки, проволоку различного размера для выполнения сварочных работ в электротехнической и радиоэлектронной промышленности, а также в космическом машиностроении. Способ СЛИПП является перспективным направлением обработки металлов, позволяет существенно снизить трудо- и энергоемкость производства, однако его промышленное внедрение сдерживает в том числе и отсутствие алгоритмов автоматического управления. Особенно это важно для создающихся в настоящее время агрегатов СЛИПП, в состав которых входят различные узлы, обеспечивающие кристаллизацию и деформацию металла, его охлаждение, калибровку (при необходимости) и смотку готовых изделий в бухты. Автоматическое управление должно обеспечить заданный расход металла, одинаковый во всех узлах агрегата, заданные значения температуры металла на входе и выходе из деформирующего узла, согласовать скорость вращения приемного намоточного устройства с расходом металла. Для этого необходимо создать математическую модель, реализовать её программно и визуализировать. Проведена постановка задачи моделирования и представлена упрощенная математическая модель на основе обыкновенных дифференциальных уравнений для управления агрегатом совмещённого литья и прокатки-прессования для получения длинномерных изделий из алюминиевых сплавов. Математическая модель для управления агрегатом СЛИПП реализована в программных продуктах WinCC 7.0 и Step 7 с применением языков программирования FBD и SCL. Разработана мнемосхема процесса, с помощью тегов реализована её связь с моделью. Приведено описание структуры программы в ПО Step 7, представлен вариант расчёта стационарного режима работы установки на мнемосхеме.
The Combined Casting and Rolled-Pressing Process (CC&RP) is used for electrotechnical-purposed aluminum rod production, which serves as half-stuff for manufacturing of different-sized aluminum wire, rivets, electrical and welding wire for electrical and radioelectronic industries. Depending on its properties, aluminum rod is widely used in the various industries, including space engineering. CC&RP method is a promising way of metal treatment, which is not yet widely implemented due to insufficiency of the automation algorithms. Automated control should provide specified values of metal consumption, temperature at the rolling mill, temperature mode of pressing node, rod temperature at the matrix end, intake device rotational speed in respect to metal consumption. For this purpose, mathematical model development, as well as its programming realization and visualization are needed. This paper provides statement of modeling task and simplified mathematical model of CC&RP method using the machine for aluminum lengthy products manufacturing. For each node of the machine ODEs is considered, that describes changes of process variables depending of time or coordinates. Initial conditions for each node input are determined from technological constants or previous node outputs. Further, the CC&RP mathematical model is realized with WinCC 7.0 and Step 7 applications using FBD and SCL languages. The process mimic panel is developed and connected with the model. The description of the program structure in Step 7 and the version of machine stationary mode calculation are provided.

РИНЦ,
Полный текст

Держатели документа:
Институт вычислительного моделирования СО РАН
Сибирский федеральный университет, Институт цветных металлов и материаловедения

Доп.точки доступа:
Пискажова, Т.В.; Piskazhova T.V.; Сидельников, С.Б.; Sidelnikov S.B.; Белолипецкий, Виктор Михайлович; Belolipetskii V.M.; Якивьюк, П.Н.; Yakivyuk P.N.; Сидельников, А.С.; Sidelnikov A.S.
629.78.06-533.6
С117

    Совершенствование агрегатов для транспортировки тепла в космических аппаратах
[Текст] : статья / Валерий Васильевич Двирный [и др.] // Исследования наукограда. - 2016. - № 3-4. - С. 12-16 . - ISSN 2225-9449
   Перевод заглавия: Improvement units for transporting heat in a spacecraft
УДК

Аннотация: Рассматривается период создания агрегатов транспортировки тепла в космических аппаратах с 70-х годов прошлого века и по настоящее время. В процессе развития космической техники связи, навигации и геодезии создавались многочисленные типы космических аппаратов с различными видами систем терморегулирования и агрегатов транспортировки тепла при общей тенденции повышения потребляемой мощности и тепловыделений, наращивания количества тепловых связей и повышения эффективности распределения тепла, увеличения срока активного существования до 15 лет. Облик современных космических аппаратов во многом определяет выбор систем терморегулирования и агрегатов транспортировки тепла, а в случае бесконтейнерного варианта при разработке блочно-модульной структуры космического аппарата, сотопанели и топология тепловых труб в них является основополагающим фактором, требующим решения сложных прикладных теплофизических задач.Также рассматривается проблема передачи и распределения многочисленных тепловых потоков, которую решают агрегаты транспортировки тепла, обеспечивая при этом требуемый диапазон температур газа в герметичном контейнере. Освещено обеспечение длительного ресурса малорасходных нагнетателей космического аппарата агрегатов транспортировки тепла жидкости как решение наиболее наукоемкой задачи для быстровращающихся роторов электронасосных агрегатов.
This paper covers creation period of units for transporting heat in a spacecraft from the 70-s of the last century to the present time. In the development of space technology communication, navigation and geodesy were created numerous types of spacecrafts with various types of thermal control systems and units for transporting heat while the general trend of increasing power consumption and heat dissipation, increasing the number of thermal couplings and improve the efficiency of heat distribution, increasing active shelf life up to 15 years. The appearance of modern spacecraft largely determines the choice of thermal systems and units for transporting heat and in the case of containerless option when developing a block-modular spacecraft structure, honeycomb and topology of the heat pipes are fundamental, requiring solutions of complex applied thermal problems. Also this paper covers the problem of multiple heat flows transmission and distribution, which solve the units for transporting heat, while providing the required range of gas temperature in a sealed container. This paper presents long life ensure of low consumption blowers in a spacecraft of units for transporting heat liquid in service, as a solution of the most scienceintensive task for the rapidly rotating rotor of electric pump units.

РИНЦ

Держатели документа:
АО «Информационные спутниковые системы» имени академика М. Ф. Решетнёва»
Институт вычислительного моделирования СО РАН Сибирский государственный аэрокосмический университет имени академика М. Ф. Решетнёва
ФГУП КБ «Арсенал» им. М. В. Фрунзе

Доп.точки доступа:
Двирный, Валерий Васильевич; Dvirnyi V.V.; Крушенко, Генрих Гаврилович; Krushenko G.G.; Голованова, Василина Валерьевна; Golovanova V.V.; Двирный, Гурий Валерьевич; Dvirnyi G.V.; Петяева, Наталья Николаевна; Petyaeva N.N.; Кирьянова, Ксения Анатольевна; Kiryanova K.A.

    Calculation and optimization of thermoelectric cooling modes of thermally loaded elements
/ E. N. Vasil’ev // Tech. Phys. - 2017. - Vol. 62, Is. 1. - P90-96, DOI 10.1134/S1063784217010248 . - ISSN 1063-7842

Аннотация: The results of calculating the characteristics of the heat-transfer process in thermoelectric cooling and temperature control are presented. The influence of the inhomogeneity of the heat flux and thermal contacts on the temperature increase of the heat-loaded element has been defined. The analysis of the cooling efficiency depending on the operating characteristics and the current strength of the power supply of thermoelectric modules, parameters of the heat-loaded element and the individual components of the system, and the conditions of the heat exchange with the external environment has been performed. It has been shown that, under certain conditions, the use of the thermoelectric modules cannot lead to a cooling of the element, but rather to heating. The possibility of optimizing the cooling to reduce the temperature of the heat-loaded element and power consumption of the thermoelectric module has been considered. © 2017, Pleiades Publishing, Ltd.

Scopus,
Смотреть статью,
WOS

Держатели документа:
Institute of Computational Modeling, Siberian Branch of the Russian, Academy of Sciences, Krasnoyarsk, Russian Federation

Доп.точки доступа:
Васильев, Евгений Николаевич
65.011.56
Ч-67

    Численная модель поведения гарнисажа в алюминиевом электролизере
[Текст] : статья / Виктор Михайлович Белолипецкий, Татьяна Валериевна Пискажова, Артем Александрович Портянкин // Вестник Иркутского государственного технического университета. - 2017. - Т. 21, № 8. - С. 151-166, DOI 10.21285/1814-3520-2017-8-151-166 . - ISSN 1814-3520
   Перевод заглавия: Computational model of ledge behavior in aluminum reduction cell
УДК

Аннотация: ЦЕЛЬЮ данной работы является создание автоматической научно- исследовательской системы, снижающей энергопотребление ванн, а также позволяющей анализировать поведение алюминиевого электролизера при подаче управляющих воздействий. Исследуется часть математической модели теплообмена в алюминиевом электролизере, рассматривающая теплопередачу через бортовую футеровку и процессы плавления - кристаллизации гарнисажа, имеющегося на внутренней поверхности стенки ванны и вносящего нелинейные аспекты в управление этим металлургическим аппаратом. Представлена новая численная одномерная модель поведения гарнисажа, позволяющая рассчитывать динамическое изменение температур по сечению борта электролизера и положение фронта кристаллизации. МЕТОДЫ. Модель использует динамическое одномерное уравнение теплопроводности, граничные условия 1 и 3 рода, условие Стефана и метод явного выделения фронта кристаллизации. РЕЗУЛЬТАТЫ И ИХ ОБСУЖДЕНИЕ. С использованием различных моделей разработанного программного обеспечения проведено сравнение расчетов динамики температур бортовой футеровки и толщины гарнисажа. Показано, что разработанная модель лучше определяет характеристики переходных процессов теплообмена при изменении рабочей температуры расплава и температуры его кристаллизации и может быть использована при разработке алгоритмов управления заданным напряжением на алюминиевых электролизерах. ВЫВОДЫ. Проведено сравнение моделей и представлены результаты расчетов, которые демонстрируют преимущества новой одномерной динамической модели теплопередачи через бортовую футеровку электролизера с учетом фазового перехода. Данная модель может быть использована в составе АСУТП получения алюминия.
The PURPOSE of this work is to create an automated research system that allows to reduce energy consumption of electrolyte pots as well as to analyze the behavior of an aluminum electrolytic cell when applying control actions. The article studies a part of the mathematical model of heat transfer in the aluminum electrolytic cell dealing with the heat transfer through the side lining and melting processes involving the crystallization of skull covering the internal walls of the pot and introducing nonlinear aspects into the control of this metallurgical unit. A new numerical one-dimensional model of skull behavior is presented. It allows to calculate the dynamic variation of temperatures along the cross-section of the electrolytic cell side and the position of the crystallization front. METHODS. The model uses a dynamic one-dimensional heat equation, boundary conditions of the 1st and 3rd kind, Stefan's condition, and the method of explicit identification of the crystallization front. RESULTS AND THEIR DISCUSSION. Using different models of the developed software the calculations of the side lining temperature dynamics and skull thickness have been compared. It is shown that the developed model better determines the characteristics of heat transfer transient processes under the change in the working temperature of the melt and its crystallization temperature and can be used to develop control algorithms for the set voltage on aluminum electrolyzers. CONCLUSIONS. The models have been compared and the calculation results have been presented. They demonstrate the advantages of the new one-dimensional dynamic model of heat transfer through the side lining of the electrolytic cell taking into account the phase transition. This model can be used as a part of the automated system of production technology control.

РИНЦ

Держатели документа:
Институт вычислительного моделирования СО РАН
Сибирский федеральный университет, Институт цветных металлов и материаловедения

Доп.точки доступа:
Белолипецкий, Виктор Михайлович; Belolipetskii Viktor M.; Пискажова, Татьяна Валериевна; Piskazhova Tatiana V.; Портянкин, Артем Александрович; Portyankin Artem A.
537.32
C16

    Calculation of characteristics of thermoelectric cooling system of heat-loaded elements of radio electronic equipment
: статья / E. N. Vasil'ev // Сибирский журнал науки и технологий. - 2018. - Т. 19, № 1. - P17-21 . - ISSN 2587-6066
   Перевод заглавия: Расчет характеристик термоэлектрической системы охлаждения теплонагруженных элементов радиоэлектронной аппаратуры
УДК

Аннотация: Modern technologies make it possible to construct electronic devices that combine small sizes and high energy con- sumption, which requires the optimization of thermal modes. A promising direction to improve cooling intensity of the heat-loaded element (HLE) and precision of temperature control is applying thermoelectric modules (TEMs), which endow the heat release system with a cooling function, i. e., allow to reach temperatures of the HLE below ambient temperature. In the present paper, the processes of heat transfer in thermoelectric system of cooling and temperature control (TESCTC) are comprehensively considered. The temperature field in the capacity of heat-distributing plate (HDP), and influence of the heat flux inhomogeneity on the HLE temperature increase have been defined. The results of operating modes calculations, taking into account the heat-power release of HLE, performance of TEM, parameters of HDP and cooler, and magnitude of thermal resistance of thermal contacts have been presented. The calculation method allows to determine the temperature of HLE and to optimize TESCTC modes to achieve maximum cooling effi- ciency and lower energy consumption. It has been found that the optimal power supply current of TEM, corresponding to the modes with the maximum efficiency of cooling, depends on the thermal resistance of the heat sink system and the power of the heat load.
Современные технологии позволяют производить радиоэлектронные устройства, сочетающие малые раз- меры и высокое энергопотребление, что обостряет проблему обеспечения оптимальных тепловых режимов. Перспективным направлением для повышения интенсивности охлаждения теплонагруженного элемента (ТНЭ) и точности терморегулирования является применение термоэлектрических модулей (ТЭМ), которые наделяют теплоотводящую систему функцией охлаждения, т. е. дают возможность достигать температу- ры ТНЭ ниже значения внешней среды. Комплексно рассмотрены процессы теплообмена в термоэлектриче- ской системе охлаждения и терморегулирования (ТЭСОТ). Определено температурное поле в объеме тепло- распределяющей пластины (ТРП) и влияние неоднородности теплового потока на увеличение температуры ТНЭ. Представлены результаты расчета режимов работы с учетом мощности тепловыделения ТНЭ, рабо- чих характеристик ТЭМ, параметров ТРП и кулера, величины термических сопротивлений тепловых контак- тов. Расчетная методика позволяет определять температуру ТНЭ и проводить оптимизацию режимов ТЭ- СОТ с целью достижения максимальной эффективности охлаждения и снижения энергозатрат. Установле- но, что оптимальная сила тока питания ТЭМ, соответствующая режимам с максимальной эффективностью охлаждения, зависит от термического сопротивления системы теплоотвода и мощности тепловой нагрузки.

РИНЦ

Держатели документа:
Krasnoyarsk Science Centre SB RAS, Institute of Computational Modelling SB RAS

Доп.точки доступа:
Vasil'ev, E.N.; Васильев Е.Н.
504.4.062.2
П 48

    Показатели устойчивого водопользования р. Енисей
[Текст] : статья / Н. Я. Шапарев, А. В. Андрианова // География и природные ресурсы. - 2018. - № 4. - С. 47-56, DOI 10.21782/GIPR0206-1619-2018-4(47-56) . - ISSN 0206-1619
   Перевод заглавия: The yenisei river in terms of sustainable water management
УДК

Аннотация: В соответствии с Водной стратегией Российской Федерации на период до 2020 г. в показателях устойчивого водопользования рассматривается одна из крупных рек мира - Енисей. Для этой цели применялись показатели водо пользования ООН, региональные показатели, разработанные нами ранее, и гидробиологические показатели, которые можно рассматривать в качестве меры устойчивости экосистемы, поскольку они отражают реакцию гидробионтов на антропогенное воздействие. Сформированная система показателей включает четыре критерия: гидрографические характеристики, социально-экономическое состояние водопользования, характеристика сточных и качество поверх ностных вод, биологические ресурсы. Каждый из критериев представлен несколькими индикаторами, содержание которых определяется статистическими материалами за 1993-2015 гг.; численными оценками, проведенными авто рами; экспедиционными и литературными данными. Показано, что расход воды в бассейне Енисея не эффективен: техническое состояние систем водоснабжения изношено, доля повторно-последовательного и оборотного использова ния воды низкая, а показатель водопользования на единицу валового внутреннего продукта высокий. В связи с паде нием уровня производства забор свежей воды и сброс сточных вод уменьшились, однако это не улучшило качества поверхностных вод. Химические и биологические методы оценки качества воды в Енисее показали сходные результаты, соответствующие градациям «загрязненная» и «грязная». Русловое зарегулирование Енисея изменило термический режим реки, что в итоге привело к структурным перестройкам биологических сообществ и способствовало снижению устойчивости водной экосистемы.
One of the world's largest rivers, Yenisei, is considered in terms of sustainable water management, in accordance with the Water Strategy of the Russian Federation into 2020. For that purpose, the UN indicators of water management and the re gional indicators (developed by the authors previously) were used as well as the hydrobiological indicators which they can be regarded as the measure of ecosystem stability as they reflect the response of hydrobionts to the anthropogenic effect. The system of indicators thus generated includes four criteria: hydrographic characteristics, the socioeconomic state of water management, waste water characteristics, the surface water quality, and biological characteristics. Each of the criteria is represented by sev eral indicators whose contents are filled with statistical material for the period 1993-2015, by numerical estimates made by these authors, and by expedition-based and published data. It is shown that the water discharge within the Yenisei basin is ineffective: the technical status of the water supply systems is in serious decay, the proportion of recycled and reused water is low, and the water consumption indicator per unit of gross domestic product is high. Because of the decline of the production level, freshwater intake and waste water discharge have decreased; however, this has not led to any improvement in surface water quality. The chemical and biological methods of water quality assessment for the Yenisei river have shown similar results corresponding to the «contaminated» and «dirty» classes. Channel storage of the Yenisei changed its thermal regime, resulting in structural rearrange ments of biological communities and triggering a decrease in stability of the aquatic ecosystem.

РИНЦ

Держатели документа:
Институт вычислительного моделирования СО РАН
Научно-исследовательский институт экологии рыбохозяйственных водоемов
Сибирский Федеральный университет

Доп.точки доступа:
ШАпарев, Н.Я.; Shaparev N.YA.; Андрианова, А.В.; Andrianova A.V.

    The Yenisei River in Terms of Sustainable Water Management
/ N. Y. Shaparev, A. V. Andrianova // Geogr. Natural Resources. - 2018. - Vol. 39, Is. 4. - P307-315, DOI 10.1134/S1875372818040030. - Cited References:27. - This work was done with the financial support from the Russian Foundation for Basic Research (16-47-240517) and from the Krasnoyarsk Krai Foundation for the support of scientific and scientific-technological activity. . - ISSN 1875-3728. - ISSN 1875-371X
РУБ Geography
Рубрики:
RESOURCES
Кл.слова (ненормированные):
Yenisei -- hydrography -- socioeconomic state of water use -- biological -- resources

Аннотация: One of the world's largest rivers, Yenisei, is considered in terms of sustainable water management, in accordance with the Water Strategy of the Russian Federation into 2020. For that purpose, the UN indicators of water management and the regional indicators (developed by the authors previously) were used as well as the hydrobiological indicators which they can be regarded as the measure of ecosystem stability as they reflect the response of hydrobionts to the anthropogenic effect. The system of indicators thus generated includes four criteria: hydrographic characteristics, the socioeconomic state of water management, waste water characteristics, the surface water quality, and biological characteristics. Each of the criteria is represented by several indicators whose contents are filled with statistical material for the period 1993-2015, by numerical estimates made by these authors, and by expedition-based and published data. It is shown that the water discharge within the Yenisei basin is ineffective: the technical status of the water supply systems is in serious decay, the proportion of recycled and reused water is low, and the water consumption indicator per unit of gross domestic product is high. Because of the decline of the production level, freshwater intake and waste water discharge have decreased; however, this has not led to any improvement in surface water quality. The chemical and biological methods of water quality assessment for the Yenisei river have shown similar results corresponding to the contaminated and dirty classes. Channel storage of the Yenisei changed its thermal regime, resulting in structural rearrangements of biological communities and triggering a decrease in stability of the aquatic ecosystem.

WOS,
Смотреть статью,
Scopus

Держатели документа:
Russian Acad Sci, Inst Computat Modeling, Siberian Branch, Krasnoyarsk, Russia.
Siberian Fed Univ, Krasnoyarsk, Russia.
Sci Res Inst Ecol Fishery Reservoirs, Krasnoyarsk 660097, Russia.

Доп.точки доступа:
Shaparev, N. Ya.; Andrianova, A. V.; Russian Foundation for Basic Research [16-47-240517]; Krasnoyarsk Krai Foundation

    Feed base and potential fish productivity of the Yenisey basin (upstream and midstream)
/ A. V. Andriаnоvа [и др.] // Vestn. Tomsk. Gos. Univ. Biol. - 2019. - Vol. 2019, Is. 45. - С. 142-163, DOI 10.17223/19988591/45/8 . - ISSN 1998-8591
   Перевод заглавия: Кормовая база и потенциал рыбопродуктивности бассейна Енисея (верхнее и среднее течение)

Кл.слова (ненормированные):
Acipenser ruthenus -- Artificial reproduction -- Brachymystax lenok -- Coregonus lavaretus -- Ichthyofauna -- Thymallus arcticus -- Zoobenthos

Аннотация: The Yenisey basin had been famous for its fish richness for a long time, and the core of the fishery had been such valuable species as salmon, whitefish and sturgeon. However, the construction of the Angara-Yenisey cascade of hydroelectric power stations, domestic and industrial waste pollution, and intensive consumer catching played a huge role in changing fish habitats and the structure of ichtyocoenosis. The complex anthropogenic load eventually led to a reduction in stocks and a decrease in the natural reproduction of valuable and highly valued fish species. To preserve and restore natural populations of valuable fish species, it is necessary to increase the efficiency of reproduction, both natural and artificial. On the other hand, successful implementation of aquaculture plants is impossible without assessing fish stocks, their demographic status, habitat conditions and capacious information about the feed base. The aim of this research was to reveal the current development level of ichthyofauna and feed base in the Yenisey basin, and, on this basis, to assess the potential fish productivity and the maximum allowable volumes of introduction of juvenile fish as objects of artificial reproduction. In 2015, we carried out zoobenthos and ichthyofauna studies in the Yenisey and the rivers of its basin (Abakan, Mana, Kan, Agul, Kungus) (See Table 1). In the Yenisey, the material was collected from 5 stations in the upper reaches (the Republics of Tyva and Khakassia) and 10 stations in the middle reaches (from the dam of the Krasnoyarsk HPS to the mouth of the Angara River); in the tributaries of the Yenisey there were from 4 (Kungus River) to 10 (Mana River) stations. In the collection and processing of ichthyological and hydrobiological material, we used generally accepted methods. Zoobenthos samples were taken in watercourse ripals; fishing was confined to the sites of hydrobiological sampling. We assessed potential fish productivity based on the reserve of benthic feeding organisms’ production. The total biomass of forage organisms (zoobenthos) was calculated taking into account the area of the water body. The maximum allowable amount of immigration of juveniles (larvae) of artificial reproduction objects, which can be released into a water body, was determined based on the reserve of production of food organisms, as well as taking into account the yield to the fishery (the commercial stock replenishment factor) and the average mass of fish producers. In total, we carried out 54 control catches with fixed nets and 30 catches with drift nets. Ichtyocenoses were described according to Gadinov and Dolgikh (2008) and Zadelenov et al. (2004). This research presents the results of studying 175 zoobenthos samples and approximately 600 fish samples selected for a comprehensive biological analysis. In the benthic fauna of the investigated watercourses, lithoreophilic organisms predominated, they populated stony soils on a fast current. The basis of biomass in the upper reaches of the Yenisey and in its tributaries was mayflies, stoneflies and caddis flies; within the republic of Khakassia and in the middle reaches of the Yenisey, amphipods and chironomids took the lead (See Fig. 1). The Yenisei was characterized by a low biomass in the upper reaches (4.2 g/m 2 ) and the maximum biomass in the area from the Mainskaya dam to the city of Abakan (19.5 g/m 2 ), where Baikal-born amphipods develop in bulk. High values were found in the Mana and Kan Rivers (12.3 and 10.8 g/m 2 , correspondingly) with caddisflies’ domination. In the Abakan, Agul and Kungus Rivers, the biomass did not exceed 8 g/m 2 , on average, the main contribution was made by stoneflies (See Fig. 2). Grayling, dace and perch dominated in the studied areas in ichthyocenoses of the Yenisey; the tributaries of the Yenisey belong to the salmon-like type, the basis of the ichthyofauna was taimen, lenok and grayling (See Fig. 3). Since there are no obligate plankton eaters in the ichthyofauna of the investigated rivers, the potential fish productivity was calculated on the basis of the reserve of zoobenthos production. The upper reaches of the Yenisey and tributaries of the Abakan and Agul Rivers are characterized by the lowest potential fish productivity (less than 20 kg/ha) (See Table 2). In the Yenisey from the Mainskaya HPS to Abakan (Republic of Khakassia), the potential fish productivity reaches the maximum (96 kg/ha) due to the abundance of higher aquatic vegetation in the ripal of the river, which is densely populated by amphipods. However, food objects in macrophyte thickets are difficult to access for mass consumption by adult fish, so we did not take into account the fish productivity of the shallow-water zone when calculating the receiving capacity in this area. The total maximum permissible volume of introduction of grown-up juvenile fish (mainly taimen, lenok, grayling) into the studied watercourses for the purposes of artificial reproduction can reach 140 million pieces (See Table 3). The greatest receiving capacity (53 million pieces) is possessed by the Yenisey (on the area from the dam of the Krasnoyarsk HPS to the Angara River), the lowest by the Agul River and its tributary Kungus (5.4 and 2.3 million pieces, correspondingly). The received values of the permissible volumes of juvenile infestation of the studied watercourses give an idea that the fishery potential of the studied watercourses is very high. Nevertheless, to restore the population of fish valuable for the region through artificial reproduction, it is necessary to develop a whole range of measures, including the protection of aquatic biological resources and the rational organization of the fishery. © 2019 Tomsk State University. All rights reserved.

Scopus,
Смотреть статью,
РИНЦ

Держатели документа:
Environmental Monitoring Technologies Department, Institute of Computational Modeling, Siberian Branch of the Russian Academy of Sciences, 50 Akademgorodok, Krasnoyarsk, 660036, Russian Federation
Krasnoyarsk Branch of VNIRO (Scientific Research Institute of Ecology of Fishery Reservoirs), 33 Parizhskoi Kommuny Str., Krasnoyarsk, 660097, Russian Federation

Доп.точки доступа:
Andriаnоvа, A. V.; Derbineva, E. V.; Gadinov, A. N.; Krivolutskiy, D. А.; Melnikov, I. I.

    Matching disparate dimensions for analytical integration of heterogeneous data sources
/ A. Korobko, A. Korobko // 11th International Conference on Management of Digital EcoSystems, MEDES 2019 : Association for Computing Machinery, Inc, 2019. - 11th International Conference on Management of Digital EcoSystems, MEDES 2019 (12 November 2019 through 14 November 2019, ) Conference code: 156715. - P66-72, DOI 10.1145/3297662.3365809 . -
Аннотация: The paper presents the first steps towards an authorial integration methodology for heterogeneous data. Exposing information from multiple heterogeneous data sources demands a global (mediated) schema. We need a model to couple with the mismatches between schemata of different sources and to provide uniform access to the data. The virtual global schema is apparently more convenient for assembling big data sources because of useless time consumption during the processes of materialization and synchronization. Thus, an integral analytical model has been proposed as the global schema of heterogeneous data sources. The suggested model provides virtual integration of complex and diverse information for further analytical processing. It combines the original multidimensional design and lattice structure according to the formal conceptual analysis. The main goal of the paper is to suggest an approach to automatic mapping between the schemata of the disparate data sources and virtual integral analytical model with human moderation. © 2019 Copyright is held by the owner/author(s).

Scopus

Держатели документа:
Department of Applied Computer Science, ICM SB RAS, Krasnoyarsk, Russian Federation

Доп.точки доступа:
Korobko, A.