1. ![](http://irbiscorp.spsl.nsc.ru/webirbis-htdocs/images/printer.jpg)
|
Вид документа : Статья из журнала Шифр издания :
Автор(ы) : Chen Y., Liu F., Zhang Z., Hong J., Molokeev M. S., Bobrikov I. A., Shi J., Zhou J., Wu M.
Заглавие : A novel Mn4+-activated fluoride red phosphor Cs30(Nb2O2F9)9(OH)3·H2O:Mn4+ with good waterproof stability for WLEDs
Место публикации : J. Mater. Chem. C. - 2022. - Vol. 10, Is. 18. - P.7049-7057. - ISSN 20507534 (ISSN), DOI 10.1039/d2tc00132b Примечания : Cited References: 56. - This work was financially supported by grants from the National Natural Science Foundation of China (NSFC) (No. 51802359), the Joint Funds of NSFC and Yunnan Province (No. U1702254), and Guangdong Basic and Applied Basic Research Foundation (No. 2020A1515010556)
Аннотация: Red-light-emitting materials, as pivotal components of warm white light-emitting diodes (WLEDs), have drawn increasing public focus. Among these, Mn4+-doped red light-emitting fluorides have drawn considerable attention when combined with an InGaN chip; however, they suffer from poor water stability under humid conditions. In this work, a novel fluoride red phosphor, Cs30(Nb2O2F9)9(OH)3·H2O:xMn4+ (CNOFM), with good water resistance was synthesized for the first time using a facile co-precipitation method at ambient temperature. Experiments were implemented for the precise analysis of its crystal structure, optical properties, micro-morphology, thermal behavior, and waterproof properties. 6.66% Mn4+-doped CNOFM maintained a stable crystal structure and possessed strong PL intensity located at 633 nm with high color purity of 96%. CNOFM showed better thermal and waterproof stability compared with the commercial K2SiF6:Mn4+ red phosphor. Without any surface modifications, the PL intensity remained at about 83% of the initial value after immersion in water for 60 min, and the mechanism was investigated. Finally, a warm WLED with a CRI of 92.3 and CCT of 3271 K was fabricated using the CNOFM red phosphor.
Смотреть статью, Scopus Найти похожие
|